EverPanel Components And Accessories


The EverPanel portable wall panel system consists of varying sized wall panels as well as a series of connectors, designed to connect wall panels to each other, and finishing pieces to provide a more finished look. The system also includes a series of accessories, including doors, lintels, and molding for stabilization. Walls stack compactly and ship efficiently to be deployed, packed up, and re-used again.

Connectors and Caps
Lug Connector
The Lug Connector is a specially designs two sided connector that slots into the receiver holes located on all sides of each EverPanel. Connectors contain a flange which keeps each lug at the right depth and recesses into the countersink located around each panel receiver hole. When two panels are connected to each other, the Lug Connector is hidden within, leaving no space between panels.
Finishing Cap
Use EverPanel Finishing Caps on exposed panel ends (ends of walls, tops of cubicles, etc) to create a more finished look. Finishing Caps allows you to seal the receiver holes located on the perimeter of each panel. Caps are designed to match the surrounding frame and friction fit into the exposed holes, creating a smooth, consistent, panel edge look. Leave out selective caps as needed for cable management.
Interpanel Connector - 2 Lug
The 2 Lug Connector is used to connect two panels side-by-side. Each connector incorporates two connector lugs which span across two panels and slot into one receiver hole on each adjacent panel. The 2-Lug Connector can be used to connect panels both on the top or on the underside of the panel and is ideal for connecting two walls or columns at 90 degree angles.
Interpanel Connector - 3 Lug
The 3-Lug Connector is used to connect two panels side-by-side with one panel placed in the middle of the two at a 90 degree angle. This connector is usually utilized to connect a column panel to two adjacent wall panels. The 3-Lug connector spans the 3 panels and slots into one of the receiver holes on each of the panels, thus locking them all together. 
Interpanel T-Connector - 4 Lug
The EverPanel Inter-Panel T-Connector is designed to connect adjacent panels. Inter-Panel Connectors may be used underneath panels or on top of panels to keep panels from pulling apart.
Interpanel L-Connector - 3 Lug
The EverPanel Inter-Panel L-Connector is designed to connect adjacent panels. Inter-Panel Connectors may be used underneath panels or on top of panels to keep panels from pulling apart.
Mounting Cap
The EverPanel Mounting Cap can be used to mount 3/4” - 1/2” panels on top of or within an EverPanel construction. Use EverPanel Mounting Caps with clear Polycarbonate sheets to create windows or with signage to enhance displays. Mounting Caps snap into place anywhere a receiver hole is located on an EverPanel and can be moved as needed.
EverPanel Swing Door
The EverPanel traditional swing door is standard swing door. The entry way measures 6'8"H x 2'8"W. This traditional door option arrives already installed inside of an EverPanel and connects with adjoining panels. All EverPanel doors are Right Hand Swing Door and may be rotated to open inwards or outwards. Left Hand Swing Door option is available as a custom order (slightly longer lead times apply).
EverPanel Accordion Door
The EverPanel accordion door consists of a specialized Lintel piece that includes a track for holding our extruded accordion door. Simply slot the folding door into the track and install between two EverPanel walls by sliding the door’s lintel over two connector lugs placed slotted into the two wall panels . Each door includes two thresholds, a double sided handle and and integrated magnet to hold the door in position when closed.
Lintel (Narrow)
The EverPanel Lintel is designed to span two EverPanel sections and to nest over lugs inserted into the top of each panel. Lintel will support blocks or panels placed over it to create a doorway, window, or opening. It weighs 3.5lbs and is constructed of a powder coating metal.
Wall-Mounting L-Channel
The EverPanel L-shaped wall mounting extrusion is used when there is a need to anchor an EverPanel wall to a fixed wall, floor, or ceiling. It may also be used to span a small remaining gap between an EverPanel wall and a fixed wall. 
Window Panel With Mounts
EverPanel offers 3 Window Panels sizes (1ft x 4ft, 3ft x 4ft, 4ft x 4ft), which may be inserted into an existing EverPanel wall segment, or on top of a standard height or cubicle height EverPanel wall. Utilize our 1/4” clear polycarbonate sheet mounted with the EverPanel Mounting Caps, which consist of chrome mounting brackets attached to standard Finishing Caps. 

We're Here to Help!

Can't find what you're looking for?
Fill out the form below with details of what you're looking for and we'll help you out!