Installing EverPanel Modular Wall Panels
Installing EverPanel is a relatively simple processes that involves laying out your floorplan, moving panels into position, and utilizing the right connectors to fasten panels together in the configuration required.
Two people can install about 100ft of wall in approximately 30 minutes, meaning that entire offices can be build from scratch in a single day, using a small team. No prior experience is required to build with EverPanel and the panels are light enough for nearly anyone to position and install.
We recommend designing your installation using our 3D builder first, and using printed instructions from the builder to help guide you on site.
It is critical to follow installation instructions carefully and to err on the side of caution when installing panels. Be sure to always provide sufficient support columns and/or T-shaped or L-shaped returns to stabilize your wall. Always connect wall sections side-by-side using Inter-panel Connectors or zip ties to secure panels, so that they do not separate when in use. Never stack panels without sufficient lug connectors between sections. It is always advisable to watch for pinch points and to wear gloved when installing panels.
Failure to follow proper installation techniques or to secure panels properly can result in a wall section falling, potentially causing injury. If you are unsure about an installation technique, always stop and contact our team for guidance before proceeding.
We're Here to Help!
Can't find what you're looking for?
Fill out the form below with details of what you're looking for and we'll help you out!