EverPanel Specifications


Easy To Install Modular Walls

The EverPanel system is modular, which means you start with as many panels as you need and can later add to your construction. Easily reconfigure, transport, and re-assemble your designs in minutes and re-use panels in new location or in new configurations.

Each panel is designed to connect easily with the panels above and below, using a lug connection system that allows sections to be stacked. You can stagger connections at 3" increments and alternate panel sizes as needed for your build. Panels are hollow, but they contain a supportive frame structure and a center support column for additional strength, thus making the panels lightweight, yet rigid and durable.

Run cables, ethernet, electric or even plumbing inside and through panels and cap unused holes with finishing caps for greater aesthetic appeal. You can add adhesive backed wallpaper to enhance the look and feel of your wall and to provide a more finished look. When you are ready for a change, or need to expand or transport your walls, simply detach sections, store on a pallet, re-use anywhere.

Panel Material
Moisture and Impact Resistant Fiberglass Reinforced Panels (FRP), bonded to a fire retardant ABS skeleton, incorporating additives for smoke reduction, fire retardancy and additional durability.  
R-Value for EverPanel panels is estimated at R-2 based on 3 inches of air space and two exterior FRP walls. This is for individual panels and complete wall values may vary based on pattern and arrangement of panels in a space. 
Sound Acoustics
Fire Rating
EverPanel Dimensions and Weights
8ft x 4ft Panel: 96” x 48” x 3” = 60.5lbs
8ft x 3ft Panel: 96” x 36” x 3” = 46.5lbs
8ft x 2ft Panel: 96” x 24” x 3” = 34lbs
8ft x 1ft Panel: 96” x 12” x 3” = 19.5lbs
7ft x 4ft Panel: 84” x 48” x 3” = 55lbs
7ft x 3ft Panel: 84” x 36” x 3” = 40lbs
7ft x 2ft Panel: 84” x 24” x 3” = 30.5lbs
7ft x 1ft Panel: 84” x 12” x 3” = 17.5lbs
4ft x 4ft Panel: 48” x 48” x 3” = 33.5lbs
4ft x 3ft Panel: 48” x 36” x 3” = 23.5lbs
4ft x 2ft Panel: 48” x 24” x 3” = 18lbs
4ft x 1ft Panel: 48” x 12” x 3” = 10.5lbs
3ft x 3ft Panel: 36” x 36” x 3” = 19lbs
3ft x 2ft Panel: 36” x 24” x 3” = 14lbs
3ft x 1ft Panel: 36” x 12” x 3” = 9lbs
2ft x 2ft Panel: 24” x 24” x 3” = 10lbs
2ft x 1ft Panel: 24” x 12” x 3” = 6lbs
1ft x 1ft Panel: 12” x 12” x 3” = 3.5lbs
Accessory Dimensions and Weights

Finishing Cap: 2.25"L x 2.25"W x .051"H
Connector Lug: 2"L x 2"W x 1.38"H
2 Way Connector: 5.25”L x 2.25”W x 0.75”H
3 Way Connector: 8.25”L x 2.25”W x 0.75”H
Mounting Cap: 2.25”L x 2.25”Wx 1.4”
EverPanel Folding Door Kit: 82"L x 36"W - 16lbs.
7x4 Accordian Door: 84”L x 36”W - 78lbs.
8x4 Accordian Door: 96”L x 36”W - 82lbs.
Lintel (Narrow): 36"L x 3"W x 1"H - 4 lbs.
L Channel: 4’H x 3"W x 3”L - 1.5 lbs.

Easily Transportable

EverPanel™ modules stack neatly on pallets and can be shipped compactly via LTL (less than truckload), standard trucks, or in overseas shipping containers.

EverPanel 4ft x 4ft or 3ft x 4ft wall modules are typically stacked upright for transport, 12 panels widthwise to a layer. Varying panel sizes may be combined on a single pallet for greater efficiency.

Individual EverPanel can be easily hand carried and positioned for installation.


Cable Channel Opening Size

EverPanel incorporates square holes around its entire perimeter, allowing cables and plumbing pipes to be run as needed through and between panel sections.

The opening size of each square is 1.86” x 1.86”, allowing pipes or cabling up to 1.75” to be run through panels. Multiple openings may be used for multiple wire, cable, and pipe combinations.


We're Here to Help!

Can't find what you're looking for?
Fill out the form below with details of what you're looking for and we'll help you out!