EverPanel PowerWall⚡

The EverPanel Power wall panel may be used in any orientation as needed.

Our EverPanel powerwall integrates with standard EverPanel products using the same interlocking connectors, it is is designed to allow for electrical power to pass through to the inside of a partitioned or divided space.

The plug on the exterior side of the wall plugs into a standard wall outlet using 110V power. The interior outlet has two standard 110V outlets along with 2 USB ports. The EverPanel PowerWall can handle up to 15amps of current.

Each PowerWall Panel is a standalone power passthrough and they cannot be electrical chained together. Powerwalls can use the same building circuit or different building circuits.

If PowerWalls use the same building circuit, current may be limited by building circuit’s max current. For example, two PowerWalls plugged into a 20A circuit will have a max total current allowance of 20A, rather than 30A (15A from each PowerWall).
 

TOOLLESS ASSEMBLY	EASY TO CLEAN	SUSTAINABLE OPTION
Easily assemble and disassemble with a minimally skilled crew.	Use only mild soap such as dishwashing liquid, and a non-abrasive cloth or sponge.	Easily disassemble and move the modular wall system to reuse assets and reduce waste.

Each EverPanel consists of a specialized ABS Plastic frame system sandwiched between FRP or Soundsorb sheet facings. Each EverPanel contain integrated receiver holes to accommodate connectors for interlocking panels to adjacent panels. Reciever holes can also be used for running power and networking cables through partitions.

• • Meets ASTM E84 Class C Fire Standards.

  • Easy to install, remove, relocate, and re-build.

  • Incorporates integrated cable slots for power, networking & plumbing requirements.